Skip to content
(205) 919-4494
LeafBlaster Pro micro-mesh gutter guard on a brick home with oak trees
Gutter Guard Brands Compared

LeafFilter vs. LeafGuard vs. LeafBlaster Pro

Two stainless micro-mesh guards and one gutter-and-hood system, compared using what each brand publishes. None lists a price. With us, stainless micro-mesh runs $7–$10 per linear foot, and a typical Birmingham home costs about $1,050–$3,000 depending on the guard.

Licensed

AL Homebuilder

Manufacturer

GAF Certified Plus

Google Rating

5.0 Star Rated

Pricing

Honest, Fair Quotes

Gutter Guard Brands Compared

The Short Answer

LeafFilter and LeafBlaster Pro are the same kind of product: a fine stainless steel mesh that sits over your gutter and lets rain drop through. LeafGuard is a different kind: it removes your gutters and installs a one-piece aluminum gutter whose top curls over into a hood. All three publish warranties and none publishes a price. We install LeafBlaster Pro. With us, stainless micro-mesh runs $7–$10 per linear foot, and a typical home with 150 to 200 feet of gutter costs about $1,050–$3,000 depending on the guard.

Two are guards, one is a gutter
LeafFilter and LeafBlaster Pro are stainless micro-mesh guards that go on gutters. LeafGuard replaces your gutters with a one-piece gutter that has a hood built in.
Priced by the foot, not the house
None of the three publishes prices. Our Birmingham ranges: micro-mesh $7–$10/lf, reverse-curve hood $10–$15/lf. A typical home runs about $1,050–$3,000 depending on the guard.
Who installs it
LeafFilter and LeafGuard sell direct through their own installers. LeafBlaster Pro is sold only through independent contractors, which is how we install it.

Side by Side

The Three Brands, Feature by Feature

What each brand says about its own product, checked against its own website in November 2026. Sources are listed under each brand below.

LeafFilter, LeafGuard and LeafBlaster Pro compared by design, material, warranty, installer and pricing
FeatureLeafBlaster ProLeafFilterLeafGuard
DesignStainless steel micro-mesh guard (Z-Bend). An all-aluminum line is also offered.Stainless steel micromesh guardOne-piece gutter with a built-in hood. Water follows the curve into the gutter while leaves roll off.
Goes onNew or existing guttersYour existing gutters, held by internal hangers fastened into the fascia. LeafFilter also sells new seamless gutters.Replaces your gutters. The old ones are removed and the new system is cut to fit on site.
MaterialStainless steel wire mesh on an aluminum frame; the Frame-Reinforced line uses a T-6 treated aluminum frameSurgical-grade stainless steel micromesh on a uPVC frameSeamless aluminum that LeafGuard says is 20% thicker than industry standard, with a ScratchGuard paint finish
Published warranty40-year limited parts warranty from Gutterglove. Parts only: labor is not included, and the installing contractor warrants the installation.Lifetime warranty that LeafFilter says guarantees the gutters won't clog. If clogging causes an overflow, it repairs the problem or refunds the material price.Lifetime no-clog warranty: if it clogs while you own the home, LeafGuard cleans or repairs it free. The paint finish carries a limited lifetime warranty from Englert.
If you sell the houseTransferable to any later ownerTransferable to the next homeownerThe finish warranty transfers if Englert is notified within 30 days of the sale. The no-clog promise is written for as long as you own the home.
Who sells and installs itCertified independent contractors only. Not sold at retail or online to homeowners.Sold direct. LeafFilter's own estimators and professional installers.Sold direct. LeafGuard's own licensed installers, after an in-home estimate.
Published pricingNot published. Set by the contractor after assessing the home.Not published. Quoted after a required at-home estimate; the quote holds for one year.Not published. Priced from an in-home measurement of your home and gutters.

Brand by Brand

What Each Brand Is, in Plain Terms

LeafBlaster Pro

Gutterglove's contractor-installed line: stainless steel micro-mesh on an aluminum frame, fitted to new or existing gutters.

Warranty
40-year limited parts warranty from Gutterglove. Parts only: labor is not included, and the installing contractor warrants the installation.
Pricing
Not published. Set by the contractor after assessing the home.

LeafFilter

A direct-to-consumer brand: surgical-grade stainless micromesh in a uPVC frame, installed on your existing gutters by LeafFilter's own crews.

Warranty
Lifetime warranty that LeafFilter says guarantees the gutters won't clog. If clogging causes an overflow, it repairs the problem or refunds the material price.
Pricing
Not published. Quoted after a required at-home estimate; the quote holds for one year.

LeafGuard

Not a cover for your gutters: a one-piece seamless aluminum gutter with the hood built in, fabricated on site and installed in place of your old gutters.

Warranty
Lifetime no-clog warranty: if it clogs while you own the home, LeafGuard cleans or repairs it free. The paint finish carries a limited lifetime warranty from Englert.
Pricing
Not published. Priced from an in-home measurement of your home and gutters.

Where Gutter Helmet fits

Gutter Helmet is the other name that comes up. It is a ribbed aluminum hood-style gutter guard that relies on surface tension, a similar idea to LeafGuard's curve, but sold as a guard rather than a whole gutter. Its dealers start with an evaluation of your existing gutters and a free estimate, and Gutter Helmet advertises a transferable lifetime performance warranty. Sources: gutterhelmet.com, gutterhelmet.com/how-it-works.

Oaks, Pines, and Summer Storms

Micro-Mesh or Hood Under a Birmingham Tree Canopy

The brand matters less than the design. Here is how each design handles what falls on a wooded Birmingham roof.

Stainless micro-mesh (LeafFilter, LeafBlaster Pro)

  • Pine needles: the openings are too fine for a needle to drop through, so needles stay on top where wind and rain move most of them off.
  • Oak tassels and pollen: spring tassels and pollen can mat on the mesh surface. They come off with a soft brush from a ladder or an extension pole; they don't end up rotting inside the gutter.
  • Heavy rain: water falls through the whole width of the mesh rather than one narrow slot, so a downpour off a steep roof has a wide target.

Reverse-curve hood (LeafGuard, Gutter Helmet)

  • Big leaves: a hood is good at shedding whole leaves, which slide off the nose and fall to the ground.
  • Pine needles: needles can lie across the slot at the front of the hood. Both LeafGuard and LeafFilter include pine needles in their no-clog promises, so ask how a clog is handled under the warranty.
  • Heavy rain: water has to stay attached to the curve to turn into the gutter. In a hard downpour off a steep or long roof plane, fast-moving water can overshoot the nose. LeafGuard says its gutters handle 32 inches of rain per hour; ask the estimator how they treat your steepest valleys.

Our take for most wooded lots around Birmingham: a stainless micro-mesh guard on sound, well-pitched gutters. If your gutters are sagging, rusted or too small for the roof, fix that first with new seamless gutters or a gutter repair, then guard them.

Want a Straight Answer for Your Roof?

We'll check your gutters' pitch and fascia, look at the trees over your roof, and quote LeafBlaster Pro by the linear foot. Free, with no pressure.

2026 Birmingham Pricing

What Gutter Guards Cost, by Type

LeafFilter, LeafGuard and LeafBlaster Pro all quote after measuring your home. These are our planning ranges for the guards we install, materials and labor included.

What We Install Most

Stainless micro-mesh

$7–$10per linear ft installed

The design LeafFilter and LeafBlaster Pro use

  • Stops pine needles and roof grit
  • Goes on sound existing gutters
  • Our LeafBlaster Pro installs

Reverse-curve solid hood

$10–$15per linear ft installed

A hood fitted over existing gutters

  • Sheds whole leaves well
  • Needs a precise pitch to catch water
  • Gutter not included

Basic mesh or screen

$3–$5per linear ft installed

Large-opening screen

  • Lowest upfront cost
  • Stops whole leaves
  • Pine needles pass through

Why square footage doesn't set the price

A 1,500 sq ft ranch and a 1,500 sq ft two-story can have very different lengths of gutter. Guards are priced by the linear foot, then adjusted for height, roof pitch and the shape of the gutters underneath. A typical home with 150 to 200 feet of gutter lands around $1,050–$3,000 depending on the guard.

Comparing a LeafGuard quote

LeafGuard replaces the gutter itself, so its quote includes new gutters. Line it up against new seamless gutters plus a guard, not against a guard alone, and ask each company what happens to your fascia if rot turns up when the old gutters come down.

What We Install

The Three LeafBlaster Pro Lines

Gutterglove makes LeafBlaster Pro in Tennessee and sells it only through contractors. Its own guidance on which line fits which home:

LeafBlaster Pro stainless steel micro-mesh gutter guard on a gutter

Stainless Steel Micro-Mesh

Most homes with average tree cover and regular rainfall.

LeafBlaster Pro frame-reinforced micro-mesh guard with aluminum frame

Frame-Reinforced Micro-Mesh

Mature oaks or pines within 30 feet of the house, and high-wind exposure.

LeafBlaster Pro all-aluminum gutter guard

All-Aluminum

Heavy-rain roofs where water capacity matters more than catching fine debris, or where you want a color match.

Gutterglove's 40-year limited warranty covers the guard's parts and transfers to the next owner. It does not cover labor or the installation, which is why the installer matters: our own written workmanship warranty covers the install. See how we install gutter guards for the step-by-step.

Before Any Brand

Signs Your Gutters Need Attention First

A guard only works on a gutter that drains. These are the signs we look for at the estimate, whichever brand you end up choosing.

Water spilling over the front edge

In a moderate rain, water should run to the downspouts. Water sheeting over the lip means the gutter is clogged or pitched wrong.

Dark stains or soft wood on the fascia

Overflow soaks the board behind the gutter. Rot there has to be fixed before any guard goes on.

Trenches under the drip line

A line of washed-out soil or mulch below the roof edge shows where water is landing instead of draining away from the foundation.

Gutters pulling away from the house

Packed wet needles and grit are heavy. Hangers that have let go need resetting so the guard sits on a straight, sound gutter.

Project Gallery

Gutter Guard Projects Around Birmingham

Loading map…
Protective gutter guards are installed on the dormer gutters above a brick front entrance.
4 photos

Gutter Guards in Brookwood Forest, Mountain Brook, Al

Mountain Brook

High-gabled rooflines on this brick residence in Brookwood Forest, Mountain Brook received a functional upgrade to protect the home's drainage system. The dark aluminum gutters, which accent the grey architectural shingles and black window frames, were fitted with new gutter guards to keep out falling leaves and debris. This installation extends across multiple roof levels, including the steep dormers on the front facade and the long runs above the side brick walls. Downspouts routing water down the corners near the rear screened-in porch were also cleared and integrated into the protected system. The completed work provides a low-profile solution that preserves the clean lines of the exterior trim.

Gutter Guards
View Project
Aerial view of a complete roof replacement featuring clean ridge lines on a home in Cherokee Bend, Mountain Brook.
8 photos

Roof Replacement in Cherokee Bend Mountain Brook, AL

Cherokee Bend

A complete roof replacement resolved wear and tear on this brick ranch home in Cherokee Bend, Mountain Brook. The installation features dimensional architectural shingles in a variegated gray tone, which complement the classic red brick exterior. New black pipe boots, ridge vents, and updated metal flashing around the brick chimney ensure proper ventilation and water shedding. To handle the heavy leaf cover from the surrounding canopy, the next phase of this project adds a new gutter installation with low-profile mesh gutter guards. Once complete, these updates will provide lasting protection while blending seamlessly with the home's white trim and dark shutters.

Roof ReplacementGutter InstallationGutter Guards
View Project
Wide aerial perspective captures various interconnected shingle roof levels and a central flat roof.
47 photos

Roof Replacement off Knollwood Dr in Mountain Brook, AL

Knollwood

5.0 (1 review)

Located in the Knollwood neighborhood of Mountain Brook, this white painted brick house underwent a full roof replacement. The old shingles were fully removed, allowing for the installation of new plywood sheathing over the existing horizontal wood roof planks. The work addressed multiple architectural surfaces, combining traditional shingle roofing with low-slope flat roofing sections. New white gutter installation was also completed along the roofline, matching the home's trim and columned front porch entry. The multi-panel skylight array on the rear roof plane was carefully sealed and integrated into the new shingles to ensure long-term weather protection.

Roof ReplacementFlat RoofingSkylight Installation+3 more
View Project

Got Questions?

Gutter Guard Brand FAQs

01What are the best brands of gutter guards?
The best-known professionally installed brands are LeafFilter and LeafBlaster Pro (stainless micro-mesh guards on your gutters), LeafGuard (a one-piece gutter with a built-in hood) and Gutter Helmet (a ribbed aluminum hood-style guard). The right one depends more on design than on name. Fine stainless mesh stops pine needles and roof grit; a hood sheds leaves but depends on water following its curve. Under Birmingham's oaks and pines we install LeafBlaster Pro micro-mesh, and we'll tell you at the estimate if a different design suits your roof better.
02How much does LeafFilter cost for a 1,500 sq ft house?
LeafFilter doesn't publish prices; it quotes each home after a required at-home estimate and holds that quote for one year. Square footage isn't what sets the price anyway. Gutter guards are priced by the linear foot of gutter, plus stories, roof pitch and the condition of the gutters underneath. For comparison, our 2026 Birmingham ranges are $7–$10 per linear foot for stainless micro-mesh (the same design as LeafFilter), $3–$5 for basic screen and $10–$15 for a reverse-curve hood. A typical home with 150 to 200 feet of gutter runs about $1,050–$3,000 depending on the guard. Those are Patriot's prices for the guards we install, not LeafFilter's.
03What is the difference between LeafFilter and LeafGuard?
LeafFilter is a guard that goes on your existing gutters; LeafGuard replaces your gutters entirely. LeafFilter puts a stainless steel micromesh in a uPVC frame over the gutter, so water drops through the mesh. LeafGuard is a one-piece seamless aluminum gutter with a hood built into the top, so water follows the curve into the gutter and leaves roll off. Both sell direct through their own estimators and installers, and both offer a lifetime no-clog warranty.
04Can I get LeafGuard in Birmingham, AL?
Yes. LeafGuard lists a Leafguard of Birmingham location on its website, and like its other locations it sells through an in-home estimate with its own installers. Because LeafGuard replaces the gutter itself, compare its quote with the price of new seamless gutters plus a guard, not with a guard alone.
05Which gutter guard works best with pine needles?
A fine stainless steel micro-mesh is the most dependable answer for pine needles, because the openings are too small for a needle to slip through. LeafBlaster Pro recommends its Frame-Reinforced micro-mesh for homes with mature oaks or pines within 30 feet. Hood designs keep needles out of the trough by shedding them, and LeafGuard includes pine needles in its no-clog guarantee. Whatever you choose, needles can still collect on top of a guard and need a sweep now and then.
06Do gutter guards still need cleaning?
Yes, a little: no gutter guard is maintenance-free. Fine debris, oak tassels and pollen can sit on top of any guard. With a good micro-mesh guard the job becomes clearing the surface with a soft brush once or twice a year instead of scooping wet sludge out of the gutter. LeafBlaster Pro sends a free gutter brush for that job when the guard is registered after installation.
07Is Gutter Helmet the same as LeafGuard?
No. Both use a curved hood that water follows into the gutter, but Gutter Helmet is a ribbed aluminum gutter guard, while LeafGuard replaces the gutter with a one-piece unit that has the hood built in. Gutter Helmet is sold through local dealers after a free estimate and advertises a transferable lifetime performance warranty.
08Why does Patriot install LeafBlaster Pro?
Because it is sold only through contractors, the company that measures your gutters is the company that installs the guard and answers for the work. LeafBlaster Pro has three lines, so we can match the guard to your tree cover and rainfall instead of fitting one product to every house. Gutterglove backs the guard with a 40-year limited parts warranty that transfers to the next owner, and our own workmanship warranty covers the installation.

Ready to Start Your Next Home Project?

Don’t let exterior issues keep you up at night. Get the peace of mind you deserve with Birmingham’s most trusted and reliable home exterior experts.

Call NowFree Estimate